Lock in two years of UAD Spark for just $99/year. Birthday offer ends 5/15.
Apollo

C-Suite C-Axe Guitar Noise Suppressor

4.1 (54)

Remove buzz and hum in realtime, for cleaner guitar and bass recordings.

  • Reduce buzz and hum from your guitar signal for clear, professional recordings
  • Harness fully adaptive processing to preserve the nuances and character of your tone
  • Record in realtime through pedals or effects chains without noise
  • Fix tracks affected by noisy pickups, amps, grounding, and nearby appliances

Runs on macOS or Windows. Requires an Apollo audio interface or UAD Accelerator. View full system requirements.

C-Suite C-Axe Guitar Noise Suppressor

$349

$349

Hear It In Action

Plug-In:

Hear It In Action

Hear It In Action

Plug-In:

Hear It In Action

Plug-In:

Remove Buzz and Hum in Realtime, for Cleaner Guitar and Bass Recordings

C-Axe is a dynamic noise suppressor plug-in that eliminates buzz and hum for clean, professional recordings. Developed by C‑Suite Audio exclusively for Apollo interfaces, with groundbreaking technology designed by CEDAR®, C‑Axe packs realtime buzz and hum suppression, custom tailored for guitar and bass players.

Reviews

4.1
Rated 4.1 out of 5 stars
Based on 54 reviews
Total 5 star reviews: 34 Total 4 star reviews: 6 Total 3 star reviews: 4 Total 2 star reviews: 4 Total 1 star reviews: 6
74%would recommend this product
54 reviews
  • RC
    R. C.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    1 month ago
    Do you need it?

    Absolutely if you are a guitarist or bassist. After trying it as a demo, I had no doubts about purchasing this plugin so that I could eliminate the noise from my guitar. Especially when I was using an overdrive pedal.

  • DD
    D. D.
    Verified Buyer
    I do not recommend this product
    Rated 2 out of 5 stars
    2 months ago
    Was hoping for better

    I don’t mind paying a little more for an outstanding plugin. This, however, is not one of those. For the technology, it’s way overpriced . It really is imo. I normally don’t give negative reviews but UAD emailed me for a review and I have to be honest. It’s one of those plugins that if you needed it, you begrudgingly fork over the hundreds that it cost but then you’re left wondering, did I just spend way too much for something that is a slight tone suck? Well, for me, I bundled it so I didn’t pay full price.

    To me, if they want to charge a heafty price, have it include all the other noise supressorss that they make. There’s no need to split it out for guitars or vocals, etc.

  • LG
    L. G.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 months ago
    C-Suite C-Axe™ Guitar Noise Suppressor Fantastic Tool

    A game changer. The C Suite is Noise suppressor. It is far better than using a gate. No setup. Hearing an open coil buzz and adding the plugin "Wow " No Buzz. The magic it gives you is the cedar sound. That silky sound you hear at a movie. It makes the track a whole new level of excellence.

  • DB
    D. B.
    Verified Buyer
    I recommend this product
    Rated 4 out of 5 stars
    4 months ago
    Almost perfect!

    Awesome tool! But sometimes there is still some 50Hz hum existing in the sustain of the guitar (when playing long notes and the tail lasts for more than 6-7sec).

    In most cases it resolves every 50Hz hum problems.

  • SS
    S. S.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    4 months ago
    Good clean

    Good clean GT the best

Frequently Asked Questions

Yes, you’ll need an Apollo audio interface, UAD-2 Satellite, or UAD-2 PCIe card to run these plug-ins, using the onboard DSP. The plug-ins run on the hardware itself, without adding strain to your computer’s CPU. In an Apollo, onboard DSP processing allows you to run realtime UAD plug-ins with near-zero latency, and even record that processing directly to your DAW.

This refers to the number of SHARC DSP processors in Apollo and UAD-2 hardware. A DUO core system has twice the amount of processing power compared to a SOLO core system. More SHARC DSP cores increases the number of UAD-2 plug-ins you can run on the hardware.

No, Satellites provide DSP to run UAD-2 plug-ins in your DAW.

Yes, you can start a fully functional 14-day demo from any plug-in bundled with the UAD software. Simply click “Start Demo”, and start using it in your DAW.

UAD-2 licenses follow the hardware, it does not matter which computer they are connected to. You can have up to six UAD-2 devices registered to a system in your Universal Audio account, which share those licenses. See UAD-2 Plug-In Licensing Explained for full details. Authorisation of UAD-2 hardware is managed by the UAD Meter & Control Panel Application.

You Might Also Like