The Cooper Time Cube
Recreating A Cult Classic
The original Cooper Time Cube was a Universal Audio/UREI-branded, Bill Putman/Duane H. Cooper collaborative design that brought a garden-hose-based mechanical delay to the world in 1971. The limited feature set of 14ms, 16ms, or a combined 30ms delay meant it was less flexible (and popular) than tape-based delays like the Echoplex.
With only 1,000 ever made, the CTC was noted for its uncanny ability to always sit perfectly in the mix and was used on many hit records, such as “Tell Me Something Good” by Rufus and “Low Rider” by War, for its spectacular short delay and doubling effects. Since its early discontinuation, the CTC has grown a very strong cult following and finds a home in such prestigious studios as Blackbird and Sunset Sound. Top engineers such as Vance Powell swear by the CTC for its unique effects.
A Bizarre Beauty
The Cooper Time Cube sends live audio through long pieces of tubing, not unlike a garden hose, to create a time delay. The 2' x 2' plywood housing is filled with coiled tubing, Shure mic capsules (of the SM57 variety) at both ends of each line used as speakers and pickups, and a series of tooled aluminum blocks with "tuning screws" at various places to tune the delay to a relatively flat response. The whole delay mechanism is suspended on springs within the housing to maintain "acoustical isolation," and is then filled with packing peanuts, which stay in the housing, even after shipping!
The unit allows access to the provided UREI 1109 line amplifiers, and thus to the independent delay line input gains. A meter is provided to view the delay output, plus four TRS jacks for front-panel signal access and routing (this was common on certain UA and UREI products). The rear of the unit provides permanent barrier strip connections.
The original Cooper Time Cube's front panel.
The rear panel of the Cooper Time Cube. Where's the MIDI?
Adds space to your mix, takes space from your studio — the CTC "brain" alongside its coil housing box.
The amazing innards of the Cooper Time Cube.
The UAD Cooper Time Cube Mk II plug-in adds modern features like tempo sync, pan, and EQ.
Re-Cooperating an Endangered Classic
The UAD Cooper Time Cube Mk II plug-in is a feature-enhanced improvement on the original delay system design. While the Cooper Time Cube Mk II plug-in retains the all-important mechanical delay sound of the original hardware, it goes much further by offering all the necessary features expected from a modern delay device: Delay, Decay, Pan, and Volume controls plus Tempo Sync and Automation for each of the two independent delay lines.
The distinct sound of the single or double-hose coil is preserved regardless of delay setting, and either sound is available at the flick of a switch. The CTC Mk II also incorporates other enhanced tone-shifting features such as the Color switch, which presents the user with the original (A) or “leveled” (B) frequency response, plus tone controls and a 2-pole high pass filter. Lastly, a switch is presented for soloing the Wet signal, and the Send switch allows momentary interruption of the signal being sent into the delay system.
Get more articles to read delivered to your inbox
Read More
See All ArticlesDiscover the Legacy of Universal Audio in Muscle Shoals
Explore the rich history of the iconic UA 610 tube console at legendary Fame Recording Studios and how Bill Putnam Jr. is restoring a vintage 610 console for modern workflows.
Best UAD Vocal Chains
Producers reveal the vocal plug-in chains used by the world’s biggest artists.
Build a Pro Pedalboard with UAFX & Voodoo Lab
Learn the best way to assemble your pedalboard, big or small, with UA guitar guru James Santiago and Voodoo Lab.